Zoeller® Effluent Pump, Single Seal, Series: High Head Dose-Mate 150, 77 gpm Maximum, Automatic/Non Automatic: Non-Automatic, 1-1/2 in NPT Outlet, 38 ft Maximum Head, 4/10 hp, 115 VAC, 8.5 A, 60 Hz Frequency, 1 ph ph, 3450 rpm Motor, Engineered Thermoplastic Non-Clogging Vortex Impeller, 130 deg F, Upper Sleeve/Lower Ball Bearing, Cast Iron, 12-1/8 in H Dimensions
Our Model N152 nonautomatic Effluent Pump is designed to remove unwanted water in septic effluent applications. It is an ideal choice in high pressure or high flow applications. The professional-grade, 4/10 HP Model 152 is known for its dependability. The N152 is a nonautomatic pump requiring a piggyback float switch or control panel for operation. Either option allows you to set the on and off point of the pump in the field. This is ideal in an application with a deep sump pit or pump tank. The Model 152's switch case, motor housing, and pump housing are each constructed of cast iron. The corrosion resistant engineered plastic vortex impeller has a smooth surface allowing water and solids to pass freely through the pump. The pump's identification tag, handle, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 152 is able to withstand the most demanding applications. Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.
cCSAus Certified|SSPMA Certified|UL Listed
Amperage Rating
8.5 A
Automatic/Non Automatic
Non-Automatic
Bearing Type
Upper Sleeve/Lower Ball
Dimensions
12-1/8 in H
Frequency Rating
60 Hz
Horsepower
4/10 hp
Impeller Type
Engineered Thermoplastic Non-Clogging Vortex
Material
Cast Iron
Maximum Flow Rate
77 gpm
Maximum Head
38 ft
Motor Speed
3450 rpm
Outlet Size
1-1/2 in NPT
Phase
1
Series
High Head Dose-Mate 150
Temperature Rating
130 deg F
Type
Single Seal
Voltage Rating
115 VAC
Brand
Zoeller®
Country of Origin
US
Oil filled motor optimizes heat dissipation which prevents the pump from overheating during extended-use occurrencesA versatile nonautomatic pump that can be paired with your choice of a piggyback float switch or a control panel to control the pump's on/off level (both sold separately)Built with an engineered plastic vortex impeller to allow free passage of 3/4 inch spherical solids to prevent the potential for cloggingPowder-coated epoxy finish provides corrosion-resistance and extends pump life in harsh environmentsStainless steel screws, bolts, and handle to prevent rust and corrosion even when installed in an elevator sump pump applicationComes standard with a 1-1/2 inch threaded discharge and a 1-1/2 inch x 2 inch PVC male adapter so it will mate up to the most common pipe sizes100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive itComes with a 3-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product